Due to its double and directly opposite teeth, Gates Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. They are available with the classical trapezoidal tooth profile and also with the unique GT tooth profile. A Twin Power GT2 belt has twice the power rating of a Twin Power HTD belt. It is characterised by extraordinary load-carrying power and high tooth jump resistance ensuring a positive non-slip drive. In addition, the belt runs at very low noise. Gates Twin Power is available in PowerGrip GT2 8MGT and 14MGT, HTD 5M and PowerGrip XL, L And H pitches.
CONSTRUCTION
Similar in construction to PowerGrip classical synchronous and PowerGrip GT2 belts: strong fibre glass tensile member precisionformed elastomeric teeth and body.
Wear resistant nylon fabric on both tooth sides.
Standard widths per belt pitch in mm and belt width code:
Twin Power PowerGrip GT2
8MGT: 20, 30, 50, 85 mm
14MGT: 40, 55, 85, 115, 170 mm
Twin Power PowerGrip HTD
5M: 9, 15, 25 mm
Twin Power PowerGrip:
XL:
6.4 mm (code 025), 7.9 mm (code 031),
9.5 mm (code 037)
L:
12.7 mm (code 050), 19.1 mm (code 075),
25.4 mm (code 100)
H:
19.1 mm (code 075), 25.4 mm (code 100),
38.1 mm (code 150), 50.8 mm (code 200),
76.2 mm (code 300)
BENEFITS
High loading capacity.
Twin Power can transmit up to 100% of its maximum rated load from either side of the belt; alternatively, it can transmit a load on both sides – provided the sum of the loads does not exceed the maximum capacity.
Non-slip positive drive.
Running at low noise.
Free of lubrication and maintenance.
Temperature range: -30°C to + 100°C.
